palmiye SILVER PLUS, Installation Manual

Page: 59 / 86

59
Step 13: Check the front limit position. If the motors don’t stop automatically White button
isn’t true. You must return the last position to White Button. Correct button is Yellow button.
Motor head by pressing and releasing it. The front limit is now set.
5.5.4. LED Light Control Panel
5.5.4.1. RGB LED Programming
Step 1: Give energy to control box
Step 2: Give energy for at least 4 second and you will hear a click from control box
Step 3: Power off and power on 5 times max. within 5 sec.
Step 4: Leave while power ON. The LED lights will blink within 10 sec.
Step 5: Select a channel from your remote control you desired.
Step 6: Press “PROG” button on remote control at least 2 sec.
•
The lights have stored to desired channel on your transmitter.
5.5.4.2. Standard LED Programming
Step 1: Give energy to control box
Step 2: Give energy for at least 4 second and you will hear a click from control box
Step 3: Power off and power on 5 times max. within 5 sec.
Step 4: Leave while power ON. The LED lights will blink within 10 sec.
Step 5: Select a channel from your remote control you desired.
Step 6: Press “PROG” button on remote control at least 2 sec.
•
The lights have stored to desired channel on your transmitter.