PACOM PDR16HR-RMT-RT, User Manual

Page: 53 / 72

Digital Video Recorder
45
NOTE: Proper image display depends on the display settings of your PC. If you are experiencing display problems,
click the right mouse button on the background screen and select Properties
ĺ
Settings then set the Color quality to
“ 32 bit ”. Then select Advanced
ĺ
Troubleshoot, and then set the Hardware Acceleration to “ Full ”. Please make
sure that DirectX version 9.0 or higher has been installed if the display problem continues. To check the version of
DirectX, click Start
ĺ
RUN and type “dxdiag” then hit the enter key which will display DirectX Diagnostic Tool dialog
box. Then move to the Display tab and make sure DirectDraw Acceleration is set to “ Enabled ”. Test DirectDraw
by selecting the DirectDraw Test button. Please check the driver version of the video card and update it to the
latest version available. If you still have display problems after changing all display settings as described above,
try replacing the video card. Video cards with an ATI chipset are recommended.
Clicking exits the Player program.
y
Playback Buttons:
Plays back the current video on the screen.
Goes to the beginning of the video clip. Plays the video clip in fast reverse.
Goes back one frame of the video clip.
Plays the video clip.
Goes forward one frame of the video clip.
Plays the video clip in fast forward.
Goes to the end of the video clip.
y
:
Shows the previous camera group if there is recorded video in the previous camera group in the current screen
mode.
y
:
Cycles through the screen modes. It cycles through 2x2, 1+7, 3x3, 4x4, 4x5, 5x5 and 1+32.
NOTE: 4x5, 5x5 and 1+32 screen modes might not be supported depending on the number of saved camera
channels.
y
: Shows the next camera group if there is recorded video in the next camera group in the current screen mode.