PACOM PDR16HR-RMT-RT, User Manual

Page: 34 / 72

User’s Manual
26
Object
You can set up object detection event.
y
1 to 16: Displays camera number. Clicking each button allows you to change object detection event settings for
each camera.
y
Enable: Enables object detection event function. When the DVR detects the changes on the image compared
to the reference image in a configured object detection zone, it considers the changes as an event.
y
Set up object detection
– Set up zone...:
Set up the object detection zone.
The setup screen is made up of a grid. First, click
the
Draw or Erase radio button and select a tool
to use, and then set up the privacy area on the
image. Using the tools is identical to that of
Set
Privacy Area
at the
CAMERA
menu.
y
Sensitivity:
Set the object detection sensitivity.
The higher the number is, the more sensitive
it is.
y
Min. size: Adjust the minimum number of
detection blocks that must be activated in order
to be considered as a object detection event.
If you set to
10
, the DVR will only react to
the changes when it detects changes (activity)
in at least 10 connected blocks within the
selected detection zone. The minimum number
of blocks (Min. size) should not exceed the
selected block numbers for detection. When
selecting multiple detection area groups, the
minimum number of blocks (Min. size) should
not exceed the block numbers of the smallest
detection area.
y
Max. size: Set the maximum number of blocks (no less than the Min. size block) . If you set the Max. size value
to 100 , the DVR will ignore the changes which are detected in more than 100 blocks.
y
Activation times:
Set the dwell time to detect changes. The DVR will detect the change only when the change
lasts over the preset dwell time.
y
Reference Image:
Shows the reference image.
y
Current Image
,
Get Reference:
Shows the current image. Clicking
Get Reference
button sets the current
image as a reference image.