User’s Manual
18
Enable
Enable
option. The setup screen is made
up of a grid. First, click the
Draw
or
Erase
radio
button and select a tool to use, and then set up the
privacy area on the image. Use the tools as follows:
–
(Point)
:
Place the cursor on the image and
click the left mouse button. A single box appears
where the cursor is.
–
(Line)
:
This tool can be used to draw irregular
shapes. Place the cursor where you want to start
the line. Hold down the left mouse button and
drag the cursor to where you want the end of the
line. Release the mouse button and a group of
boxes appears along the line you drew. You can
draw lines around shapes by repeating this process.
–
(Rectangle): Hold down the left mouse button
and drag the cursor in any direction. A rectangle
appears. Once the rectangle is the size you want,
release the mouse button and the rectangle fills
with boxes.
–
(Fill)
:
When using the fill tool, clicking the mouse will fill that area of the image with boxes. If a shape has
been drawn with the line tool, clicking inside will fill the area with boxes. Clicking outside the area will fill the
outer area with boxes. If no shapes have been drawn, the entire screen will fill with boxes.
Setting Up the Alert
Summary of Contents for PDR16HR-RMT-RT
