PACOM PDR16HR-RMT-RT, User Manual

Page: 57 / 72

Digital Video Recorder
49
Appendix 1 — Network Setup (LAN)
Run the SmartGuard program and click the (Menu) button
ĺ
Setup menu
ĺ
SYSTEM – Network menu on the
main GUI.
Setting Internet Protocol (TCP/IP) Properties
y
Select
Obtain an IP address automatically
or
Use the following IP address
depending on your network
environment.
–
When selecting
Obtain an IP address automatically
, the DNS server address is set up automatically.
–
When selecting
Use the following IP address
, enter the IP address, Subnet mask, Default gateway and DNS
server address acquired from your network administrator.
Setting FEN Function
When FEN function is enabled, it is not necessary to set up port forwarding manually. However, remote connection
to the DVR might not be available depending on the network connection environment of the DVR or remote system
when the FEN function is enabled. If it is the case, you should set up port forwarding for the DVR manually in the
NAT (Network Address Translation) device to which the DVR is connected.