manualshive.com logo in svg

PACOM 9 Channel, User Manual

Share
Download
PACOM 9 Channel User Manual Download Page 98

User’s Manual 

 

86 

Text-In Search 

 

  

 

Figure 103 — Text-In Search screen. 

 

The DVR maintains a log of each time there is Text Input.  The 

Text-In Search

 screen displays 

this list.  Use the arrow buttons to highlight the event for which you would like to see video. 

 

Pressing the   button will extract the video associated with the Text Input and display the first 
image of the event.  Pressing the 

PLAY/PAUSE

 button will start playing the “event” video 

segment.  Pressing 

SEARCH/STOP

 returns to live monitoring. 

 

NOTE:  It is possible that no recorded image displays on the current screen.  Press the 

DISPLAY

 button and change the screen mode to 4x4.  You can then easily find recorded 

video during target hour. 

 

NOTE:  Text Input information will be overlaid on the image while the recorded video is 
played at regular speed. 

 
You can also narrow your event search by selecting the 

Option…

 button and setting up the new 

search condition. 
 

Summary of Contents for 9 Channel























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands