PACOM 9 Channel, User Manual

Page: 54 / 118

User’s Manual
42
Highlight
Enable Audio-Out
and press the button. This toggles between enabling and
disabling audio out.
NOTE: The DVR will NOT record audio when the recording speed is set to less than 1 ips.
You can save your Audio changes by highlighting
Save and pressing the button. Selecting
Cancel exits the screen without saving the changes.
Alarm-Out Screen
Highlight
Alarm-Out
in the Devices menu and press the button. The
Alarm-Out
screen
allows you to change the settings and establish a schedule for each alarm output from the DVR.
Figure 58 — Alarm-Out Settings screen.
Each alarm output can be given its own title by highlighting the box under the
Title heading and
pressing the button. A virtual keyboard appears allowing you to enter the title.
Highlighting the boxes under the
Type heading allows to set the alarm output for NO or NC
(normally open or normally closed).
Highlighting the box beside
Dwell Time and pressing the button allows you to set the dwell
time of the alarm output. Dwell times rang from 5 seconds to 15 minutes.
Highlighting the
Schedule tab causes the Schedule screen to display.