PACOM 9 Channel, User Manual

Page: 69 / 118

Digital Video Recorder
57
Figure 76 — Motion Detection Zone screen.
The
Motion Detection Zone
screen is laid over the video for the selected camera. You can set
up motion detection zones by selecting or clearing blocks.
NOTE: You can set up motion zones one block at a time in groups of 8 or 16 individual
block groups (9- and 16-channel DVR respectively). A block group is positioned within
the image area using the Up and Down arrow buttons, and individual blocks within the
block groups are selected or cleared using the camera buttons.
Press the button to display the menu screen. The menu on the setup screen has the following
functions:
Figure 77 — Motion Detection Zone menu.
Select — Activates highlighted blocks to detect motion.
Clear
— Deactivates highlighted blocks so that they will not detect motion.
Reverse — Activates inactive highlighted blocks and deactivates active highlighted blocks.
Select All — Activates all blocks to detect motion.
Clear All — Deactivates all blocks so that they will not detect motion.
Reverse All
— Activates inactive blocks and deactivates active blocks.
OK — Accepts changes and closes Zone setup.
Cancel — Exits Zone setup with saving changes.