PACOM 9 Channel, User Manual

Page: 70 / 118

User’s Manual
58
Highlight the
Actions
tab and the Motion Detection Actions screen displays.
Figure 78 — Motion Detection Actions screen.
The DVR can be set to react to motion detection differently for each camera. Each camera can
be associated with another camera, trigger an Alarm-Out connector, sound the DVR’s internal
buzzer, notify a number of different devices, and/or move PTZ cameras to preset positions.
NOTE: You can associate multiple cameras with a camera that detects motion.
Highlight the box under the
Record heading and press the button. A list of cameras appears.
You can associate as many cameras with that camera as you wish. If the DVR detects motion on
the selected camera, it starts recording video from all the associated cameras.
NOTE: For the Record action, the camera you select should be set to the Event or Time
& Event recording mode in the Record Schedule setup screen.
Highlight the box under the
Alarm-Out heading and press the button. A list of Alarm
Outputs appears. You can associate as many Alarm-Outs with that camera as you wish. When
the DVR detects motion on the selected camera’s input, it triggers output signals on all the
associated Alarm-Out connectors. You can also have the DVR’s internal buzzer sound if
motion is detected on the selected camera.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to
the Event mode in the Alarm-Out setup screen (Schedule tab).
Highlight the box
Notify heading and press the button. You can toggle the entire list On and
Off by highlighting Notification and pressing the button. You can toggle the individual
items On and Off by highlighting that item and pressing the button. Highlight OK and press
the button to accept your changes.