Packard Bell dot s Series Service Manual Download Page 17

Page: 17 / 182

Chapter 1

Keyboard Area and LCD Panel

No.

Component

Icon

Description

Webcam

Web camera for video communication

Microphone

Internal microphone for sound recording.

Display screen

Also called Liquid-Crystal Display (LCD), displays computer
output.

Power button/
indicator

Indicates when the computer is turned on.

Keyboard

Provides all the features of a full-sized, computer keyboard.

Power indicator

Indicates the computer's power status.

Battery indicator

Indicates the computer's battery status.

HDD indicator

Indicates when the hard disk drive is active.

Num Lock
indicator

Lights up when Num Lock is activated.

Caps Lock
indicator

Lights up when Caps Lock is activated.

Click buttons (left,
and right)

The left and right buttons function like the left and right mouse
buttons.

Touchpad

Touch-sensitive pointing device which functions like a
computer mouse.

Downloaded from LpManual.com Manuals

Summary of Contents for dot s Series























































































































































































Search results

Summary of Contents for dot s Series

Reviews:

Related manuals for dot s Series

Brands by name

Popular brands

Packard Bell dot s Series, Service Manual

Search results

Summary of Contents for dot s Series

Reviews:

Related manuals for dot s Series

Brands by name

Popular brands