manualshive.com logo in svg

Oxford Medelec Synergy Mobile, Workshop Manual, Page: 4 / 69

Share
Download
Oxford Medelec Synergy Mobile Workshop Manual Download Page 4

Table of Contents

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

TECHNICAL SPECIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Amplifiers· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.1

A to D Conversion· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.2

Data Storage · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.3

Electrical Stimulator · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.4

Auditory Stimulator · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.5

Visual Stimulator · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.6

PC Tower · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.7

DSP Card

· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.8

Graphics Card (Option) · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.9

Display (Options)· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.10

Network Card (Option)· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.11

Isolation transformer / Power Supply · · · · · · · · · · · · · · · · · · · · · · · · · · 2.12

Software · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.13

Size and Weight · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.14

Operating Conditions · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.15

Safety Standards · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.16

Quality Standards· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2.17

INSTALLATION AND OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Operating Restrictions: Cautions and Warnings · · · · · · · · · · · · · · · · · · · · · · 3.1

Disclaimer · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3.2

Signal Cables · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3.3

Installation · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3.4

Routine Maintenance · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3.5

Controls· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3.6

PC Tower rear Connector Panel · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3.7

Peripheral Connectors · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3.8

TECHNICAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

The PC Motherboard· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4.1

The DSP Sub-System · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4.2

The Control Panel & Electrical Stimulators.

· · · · · · · · · · · · · · · · · · · · · · · 4.3

The Evoked Potential Stimulators· · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4.4

The Two Channel Headbox · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4.5

The 5 Channel Headbox · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4.6

The 10 Channel Headbox · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4.7

Issue A May 1998

Synergy Mobile Workshop Manual

i

Summary of Contents for Medelec Synergy Mobile






































































Reviews:

No comments