Owandy Radiology i-max touch 3D, User Manual

Page: 105 / 119

User Manual
– Error message
NIMXEN020I
Owandy Radiology SAS 95
15. ERROR MESSAGES
The error messages are divided into different areas that can be distinguished by the error number;
the following table contains the different errors with meanings.
Main MCU board
Code Error description
000 / 001 Internal MCU error
400 ÷ 411 MCU
– DSPU communication fault (CAN Bus)
MCU EEPROM configuration
Code Error description
100 / 101 Configuration area parameter doesn't match the expected one
102 Wrong version number in configuration area
103 / 104 Timeout error occurred during an EEPROM erase/write operation
Rotation Motor
Code Error description
200 Zero position optical sensor of rotation axis always activated
201 Zero position optical sensor never activated
202 / 203 Zero position optical sensor of rotation still active after exiting from zero
sensor
204 Unexpected activation of rotation optical sensor
205 Timeout on rotation
Y translation motor
Code Error description
240 Zero position micro Y always active
241 Zero position micro Y never active
243 Timeout on Y axes
Disk collimator
Code Error description
260 Collimator timeout on zero positioning
Chin Rest
Code Error description
265 Zero position optical sensor always activated
266 Zero position optical sensor never activated
268 Timeout on movement
Hardware key board (U.I.C.)
Code Error description
270 / 271 Hardware key fault
X-Ray Controls
Code Error description
360 RX button pressed on start-up or before exam
362 RX button released during emission