Overland Tandberg NEO S 1U, Service Manual

Page: 44 / 51

NEO S-Series Library Service Manual Event Codes and Acronyms
10400666-005 ©2015-20 Overland-Tandberg

44
2A Error slider preposition movement
2B Error during opening gripper
2C Error during sled movement up to sensor
2D Error slider preposition backwards movement
30 Error slot preposition
31 Error during sled movement in <FLMoveRotation> function
32 Command sending to robotic failed
33 Error during elevator movement in <FLMoveRotation> function
34 Error during rotation in <FLMoveRotation> function
35 Error during elevator movement in <FLMoveSled> function
36 Error during sled movement in <FLMoveSled> function
37 Error during sled positioning to sensor in <FLMoveSled> function
38 Error during sled positioning to mail slot in <FLMoveSled> function
39 Error during sled positioning without sensor
3A Error during elevator movement without sensor
3B Error slot position sensor not found
40 Movement to/from slot failed
41 Error during first slider movement
42 Error during first gripper movement
43 Error during second slider movement
44 Error during second gripper movement, get range failed
45 Error during third slider movement, move home failed
46 Error during set hold current to avoid torsion
50 Preposition to drive failed
51 Elevator movement to home sensor failed
52 Sled movement to home sensor failed
53 Error during sled movement to drive position
54 Error during rotation to drive position
55 Error during elevator movement in drive position
56 Error during sled movement to rotation position
57 Error during rotation to end position
60 Move from/to drive failed
61 Error during first slider movement
62 Error during first gripper movement
63 Error during second slider movement
64 Error during second gripper movement, get range failed
65 Error during third slider movement, move home failed
70 Release magazine failed
71 Error during sled movement to rotation position
72 Error during rotation to unlock position