NEO S-Series Library Service Manual
Overview
10400666-005
©2015-20 Overland-Tandberg
12
•
Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an authorized
reseller install the part.
NOTE: For more information on static electricity, or assistance with product installation, contact your
authorized reseller.
Identify a Failed Component
Using the Operator Control Panel (OCP) or Remote Management Interface (RMI):
1.
Activate the UID (Unit Identification) LEDs from the
Maintenance > UID LED Control
screen or page. This illuminates the blue LED on the front and rear of the Base Module
to identify the library containing the failed component.
2.
Identify the module within the library that contains the failed component:
a.
In the upper left corner of the
Home
screen, locate the module that indicates an
error.
b.
Click or tap the module status area for information on the failed component.
NOTE: If dealing with a failed drive power board, there are two drive power boards in each module.
The screen indicates whether the left or right drive power board (as seen from the rear of the
library) has failed. On the failed board itself, the amber LED may be illuminated and visible
through the grating.
