E-025-2-E
52
② To restore the parameters to the factory set values, click "OK" . The message box (Fig. 121) will be
displayed. Here, click "OK" . Then the operation is completed, and the changed setting values are
reflected in the flowmeter's output. If the flowmeter's output is used to control valves or other such
parts as safety protocol, change the control loop to manual control so that the control loop cannot
be influenced by the flowmeter's output.
Fig.121
③ When the operation is finished, a message box (Fig. 122) will be displayed. Click "OK" to complete
the operation.
Fig.122
④ The window for setting items is displayed. To exit, click "Cancel" .