E-025-2-E
2
③ Click "OK" after the setting is completed to display the message box (Fig. 58). Click "OK" here to
change the settings to the inputted values.
Fig.58
④ The message box (Fig. 59) is displayed after changing the setting values. Click "OK" to complete
the setting process.
Fig.59
⑤ The window for setting item is displayed. To exit, click "Cancel".
3.6.7 Other Settings (Other)
3.6.7.1 Display Setting (Display setting)
① Click "Setup (S)" from the menu, and select "Display setting" from the drop-down list of "Other",
then the following window (Fig. 60) will be displayed.
Fig.60
② Select for respective items.
Setting item
Detail
Setting range
Flow rate decimal
Number of digits following decimal point of LCD
actual flow display (Select from the right column.)
Integer, 1st Decimal,
2nd Decimal, 3rd Decimal
Total flow decimal
Number of digits following decimal point of LCD
total flow display (Select from the right column.)
Integer, 1st Decimal,
2nd Decimal, 3rd Decimal
Variables display
cycle
Update interval of displaying LCD variables
(Select from the right column.)
100ms, 300ms, 500ms,
1000ms
Back light set
Setting LCD backlight operation (Select from the
right column.)
Off: Backlight Off at all times
On: Backlight On at all times
Auto: Automatically turns off without key
operation for 10 seconds after backlight is
turned on (turns on again with key
operation)
Off, On, Auto
