![background image](http://html1.mh-extra.com/html/oval/el-2310-0be-series/el-2310-0be-series_instructions-manual_1662136034.webp)
E-025-2-E
3.6.7.3 Polling Address (Polling address)
① Click "Setup (S)" from the menu, and select "Polling address" from the drop-down list of "Other",
then the following window (Fig. 66) will be displayed.
Fig.66
② Enter numeric values for the item.
Setting item
Detail
Setting range
Polling address
Polling address (Address for multi-dropping)
Default: 0
When connecting two or more flowmeters to the same
segment, assign different addresses other than“0”to
each flowmeter.
0 to 63
③ Click "OK" after the setting is completed to display the message box (Fig. 67).
Click "OK" here to change the settings to the inputted values.
Fig.67
④ The message box (Fig. 68) is displayed after changing the setting values. Click "OK" to complete
the setting process.
Fig.68
⑤ The window for setting item is displayed. To exit, click "Cancel".