OutBack Power EnergyCell 1100RE, Installation Manual And Owner'S Manual

Page: 54 / 70

Publication No. US-VR-OM-002
March 2008
www.enersys.com
15
6.3 Recommended Installation Equipment and Supplies
Before working with the battery system, be sure that you have the proper protective clothing,
safety equipment and insulated tools as specified in Section 2.0.
The following is a list of equipment typically recommended for installation of a PowerSafe™
VRLA Battery System.
Be sure you have all the proper protective clothing and safety
tools and equipment on hand before starting the installation.
TABLE 6.2
EQUIPMENT RECOMMENDED
Forklift or Portable Lift Crane
Chalk Line
Torpedo Level (Plastic)
Torque Wrench (10-200 in-lbs)
Torque Wrench (50-100 ft-lbs)
Floor Anchors (User-supplied per battery system and stress analysis
Floor Shims (User-supplied)
3/8” Drive Rachet Wrench with Minimum 3” Extension
With 3/8” thru 11/16” and M6, M8, and M10 Sockets
Box Wrenches (3/8” to 11/16” and M6, M8, and M10)
Screwdrivers
Wipes, Paper or Cloth
Stiff-Bristle Nonmetallic Brush/Pad
Tape Measure (Nonmetallic)
Safety Equipment and Clothing
Small Paintbrush
Standard Allen Wrench Set
NO-OX-ID Grease
CHECK IF
ON HAND
CAUTION