OutBack Power EnergyCell 1100RE, Installation Manual And Owner'S Manual

Page: 19 / 70

PowerSafe DDm
Publication No. US-DDm-IM-003 Page 9
November 2003 www.enersysinc.com
Starting at the bottom of the FRONT verticals:
1. Insert FRONT horizontal channels into the
vertical channels. Center the horizontals
between the verticals. See figures 13A &
13B.
2. Bolt horizontal channels to vertical channels.
Refer to below list for hardware order and
Figure 14.
NOTE:
The bottom two horizontals require full
thread longer bolts at the vertical channel.
Bottom horizontal:
–
Serrated Hex Bolt (M10x1.5 – 100mm
Full Threads),
–
Rack Frame,
–
External Tooth Washer,
–
Flat Washer,
–
Lock Washer,
–
Hex Nut
Second from bottom horizontal:
–
Serrated Hex Bolt
(M10x1.5 – 75mm Full Threads),
–
Rack Frame,
–
External Tooth Washer,
–
Flat Washer,
–
Lock Washer,
–
Hex Nut
All other horizontals:
– Serrated Hex Bolt (M10x1.5 – 25mm)
3. Finger-tighten connections.
4. Install ALL FRONT horizontals before
continuing.
INSTALL FRONT HORIZONTAL
CHANNELS
FIGURE 13A
INSTALL FRONT HORIZONTAL
CHANNELS
FIGURE 13B
REAR HORIZONTAL CHANNEL HARDWARE
DETAIL
FIGURE 14