OutBack Power EnergyCell 1100RE, Installation Manual And Owner'S Manual

Page: 2 / 70

The following PowerSafe DDM Modular Battery Systems Installation Manual is copyright 2003 by EnerSys. This document cannot
be copied or reproduced without the express written permission of EnerSys Inc.
Worldwide Corporate Offices
North America
Tel: +1 360.435.6030
Fax: +1 360.435.6019
Europe
Tel: +49 9122.79889.0
Fax: +49 9122.79889.21
Latin America
Tel: +1 561.792.9651
Fax: +1 561.792.7157
Asia Pacific
Tel: +852 2736.8663
Fax: +852 2199.7988
EnergyCell RE High Capacity Specifications
Models : 800RE 1100RE 1300RE 1600RE 2000RE 2200RE 2700RE
EnerSys Part Number
DDm85-15 DDm85-21 DDm100-21 DDm100-25 DDm125-25 DDm100-33 DDm125-33
Nominal Voltage Per Cell
2V 2V 2V 2V 2V 2V 2V
Capacity 20Hr Rate (1.75VPC)
672 960 1148 1378 1716 1836 2288
Capacity 100Hr Rate (1.75VPC)
810 1150 1340 1600 2070 2140 2770
Watts Per Cell 15min Rate (1.67VPC)
1230 1757 1995 2394 3071 3192 4094
Cycle Life 50% DOD (25°C)
1800 cycles 1800 cycles 1800 cycles 1800 cycles 1800 cycles 1800 cycles 1800 cycles
Optimal Operating Temperature Range
23 to 26°C 23 to 26°C 23 to 26°C 23 to 26°C 23 to 26°C 23 to 26°C 23 to 26°C
OCV Per Cell Limit
* 2.05 2.05 2.05 2.05 2.05 2.05 2.05
Initial Charge Voltage Per Cell
** 2.27 2.27 2.27 2.27 2.27 2.27 2.27
Float Voltage Per Cell (25°C)
2.25 2.25 2.25 2.25 2.25 2.25 2.25
Float Voltage Per Cell (35°C)
2.21 2.21 2.21 2.21 2.21 2.21 2.21
Equalize Voltage Per Cell (21 to 32°C)
2.32 2.32 2.32 2.32 2.32 2.32 2.32
Maximum Charge Current (A)
148.75 212.5 250 300 375 400 500
Shelf Life (25°C)
6 months 6 months 6 months 6 months 6 months 6 months 6 months
Short Circuit Current (A)
4728 6748 7722 9267 12411 12337 16548
Internal Resistance (micro Ω) 441 309 270 225 167 169 126
Terminal Torque (Intercell Connects)
88 in-lbs
Hardware Specification (Intercell Connects)
M8 bolt, lock and flat washer
Weight Per Cell (lbs)
114.3 162.3 188.3 222.3 272.3 290.3 358.3
Dimensions Per Cell L x W x H (in)
21.8 x 11.9 x 6.5 21.8 x 8.4 x 6.5 24.5 x 8.4 x 6.5 24.5 x 9.9 x 6.5 23.5 x 9.9 x 8.9 24.5 x 12.9 x 6.5 23.5 x 12.9 x 8.9
Ah Capacity to 1.75VPC @ 25°C
Models : 800RE 1100RE 1300RE 1600RE 2000RE 2200RE 2700RE
1 hour
347 495 575 690 886 920 1182
2 hours
440 631 738 884 1138 1180 1518
3 hours
492 702 822 987 1260 1317 1680
4 hours
528 752 876 1052 1332 1404 1776
5 hours
555 790 920 1105 1390 1470 1850
6 hours
576 822 954 1146 1440 1524 1914
8 hours
600 864 1008 1208 1512 1616 2016
10 hours
610 870 1040 1250 1550 1660 2060
12 hours
624 888 1068 1284 1584 1704 2112
20 hours
672 960 1148 1378 1716 1836 2288
24 hours
676 984 1176 1416 1776 1872 2352
100 hours
810 1150 1340 1600 2070 2140 2770
Purpose
This document provides the EnergyCell RE High Capacity Installation Guide and Operation Manual.
Scope
This document applies to all models of the EnergyCell RE High Capacity series. The reference table below shows the Outback part
number cross referenced with the manufacturer part number. When using this document for installation and service operations,
please refer to the manufacturer part number when referencing critical information.
Should you have ANY questions concerning how to perform the required maintenance or installation please contact Outback
Power at the office number listed below and ask for Outback Power Tech Support.