7.4.1.1 Adjusting the groin strap
INFORMATION
The application of the product is described in the Instructions for Use (User).
The groin strap can be adjusted as follows:
•
Adjusting the belts using the clips at the rear of the back support (see fig. 34, item 1, see page 16)
•
Adjusting the belts using the strap adjustment at the thigh straps (see fig. 32, item 5, see page 16)
7.4.2 Adjusting the harness for the upper body
The following adjustment tasks are described in more detail in the included instructions for use (user):
•
Adjusting the four-point belt
•
Adjusting the five-point belt
7.4.2.1 Adjusting the harness for the upper body
INFORMATION
The application of the product is described in the Instructions for Use (User).
The harness for the upper body can be adjusted as follows:
•
Adjusting the belts using the clips at the rear of the back support (see fig. 49, item 1/2, see page 21)
•
Adjusting the belts using the closure buckles on the harness for the upper body (see fig. 46, item 2/3, see
page 21)
7.4.2.2 Adjusting the positioning vest
INFORMATION
The application of the product is described in the Instructions for Use (User).
The positioning vest can be adjusted as follows:
•
Adjusting the belts using the clips at the rear of the back support (see fig. 52, item 1/2, see page 23)
7.5 Positioning aids
CAUTION
Improper adjustment
Crushing or pinching due to adjustments which are too tight
►
Do not pinch the user when sliding in the product.
7.5.1 Adjusting the thoracic supports
1) Loosen the knurled nuts on the rear of the back support.
2) Adjust the width and height by moving the supports in the slotted holes (see fig. 88).
INFORMATION: If necessary, you can adjust the height of the supports by shifting the mounting
screws in the slotted hole of the back support.
3) Tighten the knurled nuts.
88
7.5.2 Adjusting the pommel
The pommel can be adjusted as follows:
36
Settings
Kimba
