1 Clips with rivet
6 Strap guide, fixed
2 Shoulder harness, left and right
7 Plastic loop
3 Strap pads
8 Belt buckle
4 Strap guide, loose, with mounting material
9 Crotch belt with buckle and adjustment clasp
5 Lap belts, left and right
10 Stop plate
Mounting the five-point belt
a) Mounting the shoulder harness
1) Rivet the clips (see fig. 39, item 1) in the bore holes of the back support frame (see fig. 36, item 1).
2) Thread the shoulder harness (see fig. 39, item 2) through the back support pad and back support (see fig. 38).
3) Attach the shoulder harness in the clips at the rear (see fig. 37, item 1).
b) Mounting lap belts
INFORMATION
The following section describes how to assemble the lap belt component with strap guides. Alternatively, the lap
belt can also be passed through the large bore holes in the base frame. To do so, see the section for assembly of
the two-point lap belt with metal buckle (see page 13).
1) Mount the loose strap guide on the right (see fig. 39, item 4) (see page 12).
2) Thread the right lap belt (see fig. 39, item 5) through the connection piece to the rear between the seat and
back support.
3) Thread the right lap belt through the strap guide and let it hang down (see fig. 40).
4) Thread the left lap belt (see fig. 39, item 5) through the connection piece to the rear between the seat and back
support.
5) Mount the fixed strap guide (see fig. 39, item 6) (see page 12).
6) Guide the right lap belt through the plastic loop (see fig. 39, item 7).
7) Press the belt buckle on the left end of the lap belt together (see fig. 39, item 8) and thread the right lap belt
(see fig. 39, item 5) through the buckle behind the seat (see fig. 41, see fig. 42, see fig. 43).
INFORMATION: Make sure not to push the plastic part beyond the guide in the metal part.
8) Finally, thread the right lap belt through the plastic loop again.
40
41
20
Installing options/accessories
Kimba
