70
71
6.14 Anti-slip lining
1) Clean the supporting surface of the leg support.
2) Adhere the self-adhesive anti-slip lining to the supporting surface (see fig. 73).
72
73
6.15 Incontinence cover
The installation is usually carried out by the user's attendant.
For mounting information, see the instructions for use (user).
7 Settings
7.1 Prerequisites
WARNING
Making incorrect adjustments
Tipping over, falling or malposition of the user due to incorrect adjustments
►
Adjustment and assembly work may be carried out only by qualified personnel.
►
Only the adjustments described in these instructions for use may be carried out.
►
Settings may only be changed within the allowable adjustment ranges; otherwise, the stability of the product
may be impaired (see this section and the “Technical data” section). If you have questions, contact the
manufacturer’s service department (see inside back cover for addresses).
►
Only conduct tests in the presence of an assistant.
►
Unless expressly described, you may not change any settings with a person sitting in the product.
►
Secure the user against falling out during all tests.
►
Before testing setting changes with the user seated, firmly tighten all screw connections.
►
Check for safe function before delivering the product.
30
Settings
Kimba
