77
78
7.2.3 Adjusting the back support height
1) Loosen the Allen screws on the back support tubes (see fig. 79, item 1).
2)
If present:
Loosen the truss head screws with the knurled nuts on the lower back support insert (see fig. 79,
item 2).
3)
If necessary:
Loosen the thoracic supports. Loosen the wing nuts to do so.
4) Slide the back support tubes evenly to the desired height (see fig. 79, item 3).
5)
If necessary:
Firmly reinstall the thoracic supports.
6) Tighten the Allen screws (see fig. 79, item 1).
7)
If present:
Retighten the truss head screws with the knurled nuts on the lower back support insert (see fig. 79,
item 2).
79
7.2.4 Further settings
The following adjustment tasks are described in more detail in the included instructions for use (user):
•
Adjusting the back angle
•
Adjusting the seat angle (seat tilt)
•
Adjusting the adjustable armrests
7.3 Headrests
7.3.1 Adjusting the lateral head supports
1) Open the zip at the top of the pad (see fig. 8) and push the pad behind the seat to the side.
2) Loosen the knurled nuts on the rear of the back support.
3) Adjust the distance by moving the supports in the slotted holes (see fig. 80, item 1).
4) The height of the supports can only be adjusted by changing the back support height (see page 32).
5) Tighten the knurled nuts.
6) Close the zip at the top of the pad (see fig. 8).
32
Settings
Kimba
