Otto Bock 17KO1 Series, Instructions For Use Manual

Page: 111 / 116

17.2.3 Error while charging the product
LED on
power sup­
ply LED on
battery
charger Error Resolution
Country-specific plug adapter not fully
engaged on power supply Check whether the country-specific plug
adapter is fully engaged on the power
supply.
Non-functional socket Check socket with another electric
device.
Defective power supply The battery charger and power supply
must be inspected by an authorised
Ottobock Service Centre.
No connection between battery charger
and power supply Check whether the charging cable plug is
fully engaged on the battery charger.
Defective battery charger The battery charger and power supply
must be inspected by an authorised
Ottobock Service Centre.
Take note of the confirmation signal for
differentiation.
When the battery charger is connected, a
self-test is conducted and confirmed by
beeps/vibration signals.
When these signals are emitted, the bat­
tery is fully charged.
If no signals are emitted, the connection
to the product is interrupted.
Battery is fully charged (or connection
with product is interrupted).
If the connection to the product is inter­
rupted, an authorised Ottobock Service
Centre must inspect the product, battery
charger and power supply.
111 C-Brace joint unit 17KO1=*
Appendices