Otto Bock 17KO1 Series, Instructions For Use Manual

Page: 109 / 116

Sym­
bols on
the
control
panel Beep
signal Vibra­
tion sig­
nal Event Required action
— — Charge level 10% to 34%
— — Charge level 34% to 67%
— — Charge level 67% to 100%
Indicates that the battery is fully
charged during the charging pro­
cess.
— — Battery is being charged, charge
level is less than 34%
— — Battery is being charged, charge
level is 34% to 67%
— — Battery is being charged, charge
level is 67% to 99%
3 x long 3 x long Charge level between 5% and 10% Charge battery soon.
Remaining operating time approx. 1 hour.
5 x long 5 x long Charge level between 0% and 5% Charge battery immediately; the product
will be switched off after the next warning
signal.
10 x long 10 x long Charge level 0%
After the beep and vibration signals,
the product switches to empty battery
mode and then switches off.
Charge the battery.
4 x short
at inter­
vals of
approx.
65 sec.
(continu­
ously)
— Charging the battery outside the
allowable temperature range Check whether the specified ambient con­
ditions for charging the battery were met
(see Page 105).
— — Maintenance required because the
maintenance date has already been
reached or exceeded The product must be inspected by an
authorised Ottobock Service Center. For
disassembly of the joint unit, see the sec­
tion “Assembling/disassembling the joint
unit on the orthosis” (see Page 79)
— — Bluetooth activated
— 1 x long — Battery charger is connected
— — 3 x short Charging mode started (3 sec. after
connecting battery charger)
— 1 x short 1 x short Mode switching or changing adjust­
ment parameters is performed using
the Cockpit app.
If the parameter “
Volume of acous­
tic signal
” is set to “0” in the Cock­
pit app, only a vibration signal is
emitted.
109 C-Brace joint unit 17KO1=*
Appendices