manualshive.com logo in svg

Otodynamics DP Clinical, User Manual, Page: 90 / 228

Share
Download
Otodynamics DP Clinical User Manual Download Page 90

CHAPTER TEN

ABR test

90

ABR test procedure

 If 

Checkfit

 is selected, the device will go back into Checkfit and re-check 

whether ear cups are being used or not.

 If 

Yes

 is selected, the device will go into ear cup Checkfit as shown below.

 

Ear Cup mode set to On

 

The device will go straight to ear cup Checkfit without checking for ear cup 

use.

 

Ear Cup mode set to Off

 

The device will go straight to normal Checkfit without checking for ear cup 

use.

10.4 

ABR test

 

During the test the Otoport plays a series of clicks into the ear and records 

the electrical response from the sensors (electrodes).  The ABR signal is 

very small and difficult to distinguish from other electrical signals.  

 

The ABR test screen shows progress towards the detection of an ABR 

response.

Summary of Contents for DP Clinical





































































































































































































































Reviews:

No comments