manualshive.com logo in svg

Otodynamics DP Clinical, User Manual, Page: 187 / 228

Share
Download
Otodynamics DP Clinical User Manual Download Page 187

Otoport OAE+ABR

User Manual for Otoport DP+TE model

187

Equipment troubleshooting

22

 Equipment 

troubleshooting

22.1

  Otoport 

lock-up

 

In the unlikely event of an Otoport lock-up and it is not possible to control 

the device, turn the unit off and switch it on again.  If this is not possible, 

hold down the 

On/off 

power button for 10 seconds; this will force the unit to 

switch off.  Turn on the Otoport again.

22.2 

Switch on

 

During switch on, the Otoport conducts a series of system checks. If the 

Otoport will not switch on and complete its start up sequence, check that 

it is charged and try again. If the Otoport still fails to complete its start up 

sequence then contact your distributor or Otodynamics for support.

22.3 

System details

 

The 

Configuration

 area includes in the 

System 

menu a 

System details 

screen.  This screen provides information for Otodynamics engineers 

relating to the Otoport hardware. If your device is not functioning correctly 

or you suspect a fault, go to the 

System details 

menu and check for any 

numbers reported at the top of the screen. For support regarding a fault, 

report code numbers to your dealer or Otodynamics.

Summary of Contents for DP Clinical





































































































































































































































Reviews:

No comments