manualshive.com logo in svg

Otodynamics DP Clinical, User Manual, Page: 195 / 228

Share
Download
Otodynamics DP Clinical User Manual Download Page 195

Otoport OAE+ABR

User Manual for Otoport DP+TE model

195

Mode of operation

Signal and noise calculation

 

   

 

Measures of signal and noise levels are based on the correlation  

   

 

and differences between waveforms A and B.

Stimulus repetition rate

 

   

 

One stimulus every 13ms, approximately 80 stims per second.

Response window

  

   

 

2.5-12.5 ms or 4-10 ms after start of stimulus.  

 

 

   

 

Cosine filtered with rise and fall time of 2ms

Response frequency bands

  

   

 

Half octave, centres at 1, 1.4, 2, 2.8 and 4kHz

Response frequency range

   

 

841-4757Hz

Microphone input filter

  

 

1189-4757Hz

   

 

The attenuation at these frequencies is 3dB.  

   

 

Attenuation increases by 80dB/decade below and 40dB/decade  

   

 

above these frequencies.

Memory capacity 

 

   

 

Patients

  

 

1000

   

 

Tests per patient

  

256

   

 

Total tests

 

 

1000

Summary of Contents for DP Clinical





































































































































































































































Reviews:

No comments