manualshive.com logo in svg

Otodynamics DP Clinical, User Manual, Page: 178 / 228

Share
Download
Otodynamics DP Clinical User Manual Download Page 178

CHAPTER TWENTY-ONE

Power

178

Power

21

 Power

 

Important Note:

Only charge your Otoport with the charger, charging cradle, or 

docking station supplied by Otodynamics

21.1

  Battery life

 

The Otoport is powered using an internal rechargeable battery.  The battery 

will provide enough power for over 250 OAE or 100 ABR tests from a 

single charge with a battery life of up to 8 hours.  Note that the battery life 

depends on the Otoport usage pattern.  With built in power save functions 

and by switching the device off for the periods between tests, the battery 

will provide enough power for over a week’s intensive use. 

21.2

  Initial charge

 

The Otoport is fully charged before it leaves the Otodynamics factory.  

However, the battery will discharge slowly, even if the device is switched 

off.  It is therefore recommended that an initial charge is provided to fully 

charge the battery before using your Otoport for the first time.

Summary of Contents for DP Clinical





































































































































































































































Reviews:

No comments