Section 4 : Operation
4-32
5376000207
WHEEL
RESTRAINT
5. Visually inspect the tire to grid
contact before proceeding.
6. Take the L-Arms and slide them
into the channels on the side of
the grid. Make sure that they are
resting snugly against the tires,
with the L-Arms in close contact
with the tires. Then reset the
locking pin by turning the “Cam”
handle back to the original
position.
Be sure that the pin
seats in one of the holes.
The
tires are now confined front and
back.
7. Pivot the receivers and wheel
restraints inline with the tires.
Make any adjustments to
the wheel restraints making
sure that you clear body and
undercarriage components.
8. Rotate the “Cam” handles back
to their original positions making
sure that they fully retract to
the closed position. The tires
are confined front and back.
Readjust the wheel restraints
to insure that they are resting
snugly against the tires.
Be sure that the pin seats in
one of the holes.
Be sure that the holes in the
bottom of the restraints lock
over the retaining pin on the
receivers.
Summary of Contents for JERR-DAN 20NGADF6T-LP
