Section 6 - Maintenance
5376000207
6-16
REMOTE HAND CONTROLLER
Problem
Cause
Solution
Transmitter not
working.
LED not on or blinking.
a. Electric power turned off
b. Discharged Battery
a. Turn on CONTROL power
switch in cab or control
station
b. Replace Battery
Transmitter not
working.
LED not on or blinking
a. Discharged Battery
b. Receiver power turned off
c. Out of range
d. Communication error
a. Replace Battery
b. Check receiver power input
c. Make sure transmitter is in
range of receiver
d. Make sure transmitter and
receiver are matched.
Poor Range
a. Discharged Battery
b. Communication error
c. Communication error
a. Replace Battery
b. Obstructions, interference,
and adverse weather can
affect range
c. Check receiver antenna and
cable connections
Does not operate
correctly
a. Communication error
a. Check/ Verify antenna Wiring
Summary of Contents for JERR-DAN 20NGADF6T-LP
