Oshkosh Corporation JERR-DAN 20NGADF6T-LP, Operation And Safety Manual

Page: 53 / 112

Section 4: Operation
5376000207 4-11
9. Remove the tie-downs from the
equipment at the rear of the
deck.
10. Slide the deck back. Slide the
deck back until the approach
plate makes firm contact with the
ground. Make sure that the rear
bumper and the approach plate
are both in firm contact with
the ground before loading so
there is equal weight distribution
between the rear bumper and
the end of the deck.
11. Slowly operate the Winch Control
handle to take-up any slack in
the wire rope/cable to allow the
front tie-downs to become slack
and loose.
12. Remove the tie-downs from the
equipment at the front of the
deck.
NEVER walk or climb on the
deck surface.