Oshkosh Corporation JERR-DAN 20NGADF6T-LP, Operation And Safety Manual

Page: 41 / 112

Section 3 - Controls & Indicators
5376000207 3-7
3.6 10 FUNCTION WIRELESS HAND CONTROLLER
(IF EQUIPPED)
TILT
WINCH
ROLL ROLL
TILT
WINCH
ROLL
TILT
WINCH
EXT
LIFT
BED BED
BED
BED
1
4 2
5
3
6 7
8 9
10 11
12 13
1. Power “OFF” Button
:
Turns “OFF” the Hand Controller
Power.
2. Power “ON” Button
:
Turns “ON” the Hand Controller
Power
.
3. Power Indicator Light
:
Indicates that the Hand Controller is
powered “ON” when Illuminated.
4. Deck Roll – Forward : Controls the roll forward function of
the deck.
5. Deck Roll – Back
:
Controls the roll back function of the
deck.
6. Deck Tilt – Down
:
Controls the tilt down function of the
deck.
7. Deck Tilt – Up : Controls the tilt up function of the deck
8. Winch – In
:
Controls the wire rope winding
function of the winch.
9. Winch – Out
:
Controls the wire rope unwinding
function of the winch.
10. Wheel-Lift Boom – In
:
Controls the wheel-lift boom retraction
function.
11. Wheel-Lift Boom – Out
:
Controls the wheel-lift boom extention
function.
12. Wheel-Lift Boom – Raise
:
Controls the wheel-lift boom raise
function.
13. Wheel-Lift Boom – Lower
:
Controls the wheel-lift boom lower
function.
NOTE: Audible alarm will sound when transmiter is removed from the trans-
mitter holder with the ignition switch turned“ON”.