Oshkosh Corporation JERR-DAN 20NGADF6T-LP, Operation And Safety Manual

Page: 14 / 112

Section 1 - General Safety Practices
1-4 5376000207
Do not maneuver vehicle or personnel inside prohibited zone (MAD). Assume all
electrical parts and wiring are energized unless known otherwise
CRUSH AND COLLISION HAZARDS
• Ensure to stay clear of oncoming traffic. Driver side and passenger side controls
are standard on your Jerr-Dan carrier.
• Keep clear of rear stabilizer
• Stay clear of equipment to avoid crushing injury.
• Always use jack stands to support the deck and/or towbar/wheel-lift before
working underneath a lifted load.
• Warn personnel not to work, stand, or walk under a raised deck. Position
barricades if necessary.
• Set parking brake and chock wheels of the recovery vehicle when connecting
equipment.
• KEEP ALERT! Avoid distractions during any operating sequences.
• Be aware of height clearances when travelling.
• Look out for and avoid other personnel, machinery, vehicles and obstructions in
the area when driving the truck. Use a spotter if you do not have a clear view.