Oshkosh Corporation JERR-DAN 20NGADF6T-LP, Operation And Safety Manual

Page: 50 / 112

Section 4 : Operation
4-8 5376000207
21. Slide the deck completely
forward until it engages the hold
downs and into the transport
position.
22. Remove the wheel chocks from
the carrier’s rear tires.
23. Disconnect the power take-off
(PTO). Refer to PTO operator’s
manual.
TTAKE-OFF AKE-OFF
IN IN
OU OU
Always refer to the Operator’s Pre-Transport Checklist located on the
headboard of the deck before transporting. Make sure you have followed
all of the items on the list.
Always use approved tie downs per the equipment manufacturer’s
instructions. Although the winch wire rope/cable should remain attached
to the equipment and taut during transport, never rely on the winch and
wire rope/cable to secure the equipment to the carrier deck.
NEVER TRAVEL WITH
THE POWER TAKE OFF
CONTROL ENGAGED. This
could result in damage to the
PTO unit and the recovery
vehicle’s transmission.