![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jerr-dan-20ngadf6t-lp/jerr-dan-20ngadf6t-lp_operation-and-safety-manual_1655776046.webp)
Section 4 : Operation
4-4
5376000207
7.
Slide the deck back. Align the
arrow decal pointer on the side
of the deck with the deck control
switch in the control panel.
8. Raise the front of the deck until
the rear bumper rests firmly on
the ground.
9. Slide the deck back again.
Continue sliding the deck back
until the approach plate makes
firm contact with the ground.
Make sure that the rear bumper
and the approach plate are both
in firm contact with the ground
before loading so there is equal
weight distribution between the
rear bumper and the end of the
deck.
10.
Next, unreel enough of the wire
rope/cable from the winch to
make your hookup. If you are
a two man operation, operate
the winch control and unreel
the wire rope/cable from the
winch while the second man
keeps the wire rope/cable taut.
If you are a one man operation,
you can use the remote winch
free spool device.
(See Winch
Operation, Sections 4.3 and
4.4)
Tilting the deck too soon
may cause damage to the
mechanical hold down.
Summary of Contents for JERR-DAN 20NGADF6T-LP
