ORTEC Easy-MCS, Hardware User Manual

Page: 51 / 132

931054C / 1213 6. MENU COMMANDS
41
Fig. 25. Spectrum
Colors in Compare
Mode.
Fig. 26. Recall Settings Dialog.
Figure 25 is taken from Fig. 24. In this illustration, the starting
spectrum is displayed in color (1), the Compare spectrum is
shown in color (2), the starting spectrum’s ROIs are marked in
color (3), and the portion of the starting spectrum that exceeds
the Compare spectrum is indicated by color (4). These colors —
called Foreground, Compare, ROI, and Combine, respectively
— are chosen on the Colors dialog discussed in Section 6.6.9.6.
Press <Esc> to leave Compare mode.
6.1.6. Recall Settings...
This function restores settings saved by the Save Settings As...
function. When the Recall Settings... function is selected, a
standard file-open dialog opens (Fig. 26). The recalled settings
apply to the current MCS or buffer depending on which is
selected at the time Recall Settings... is performed.
6.1.7. Save Settings As...
This command saves the settings of the current MCS or buffer, depending on which is selected.
The dialog (Fig. 27) has several checkboxes that determine the information saved in the settings
file.
!
If the Colors box is marked, the current screen colors are saved in the file.
!
If the Display box is marked, the current settings of the Fill All, Fill ROI, Full View,
and Wrap Mode commands on the Display menu are saved.