ORTEC Easy-MCS, Hardware User Manual

Page: 27 / 132

931054C / 1213 4. GETTING STARTED — MCS-32 TUTORIAL
17
Fig. 6. Pass Control Dialog.
4) Set the Dwell Time to 1
µ
s
Click the Internal dwell radio button. Next, set the value in the box to 1. Finally, select the
time units from the list beside the Bin width field. Click the down-arrow to open the list
and select uS to set the range to microseconds. Don’t click OK yet.
5) Set the Acq Mode (acquire mode) to Sum
If the Sum button is not already marked with a dot, click it to mark it.
6) Set the Trigger to Internal
If the radio button labeled Internal is not already marked with a black dot, click it to mark
it.
7) Click OK to accept these settings
If you’ve entered all of the fields correctly, the Pass Control dialog will look exactly like
Fig. 6. If everything is correct, click the OK button to accept the settings.
4.2. Collecting Data
At this point, you have set the pass parameters for the acquisition. You are now ready to start
data acquisition and see what happens.
1) Start data acquisition
!
The Start button is at the top of the sidebar. Click it to start the acquisition.