ORTEC Easy-MCS, Hardware User Manual

Page: 47 / 132

931054C / 1213 6. MENU COMMANDS
37
Fig. 20. Print Spectrum.
Fig. 21. ROI Report Dialog.
6.1.3. Print Data...
This command prints, to the printer or a
text (ASCII) file, the contents of the chan-
nels currently selected with the marker.
The data are formatted at seven channels
per line with the channel number on the
left. To select the channels to be printed,
highlight the region by clicking and drag-
ging the mouse from one edge of the
region to the other edge.
Use the Print dialog (Fig. 20) to print the
output or save it in a disk file (click Print to file to mark it).
6.1.4. Report...
The Report... function creates a report
describing acquisition conditions and
contents of all ROIs, and sends this to
a text file and/or the printer, in one of
two output formats, Paragraph or
Column.
The ROI Report dialog, shown in
Fig. 21, opens first. If you check
Print to file, a file-save dialog opens,
prompting for a filename. Enter a name
and click OK.
Examples of the Paragraph- and Column-style reports are shown in Figs. 22 and 23, respec-
tively. Both report formats supply the same information.
If the spectrum is not calibrated, the following are reported for each ROI:
!
ROI number (1 is lowest).
!
Start channel of the ROI.
!
Stop channel of the ROI.
!
Gross area of the peak.
!
Net area of the peak, as calculated in Calculate/Data Info.
!
Centroid channel of peak, as calculated in Calculate/Data Info.