ORTEC Easy-MCS, Hardware User Manual

Page: 89 / 132

931054C / 1213 8. JOB FILES
79
CLEAR_ROI
Erases the ROIs in the buffer. The command is only valid when the buffer is selected.
DESCRIBE_HARDWARE “description”
This command accepts a 63-character description of the system. This description is saved
with the spectrum using the SAVE command function, and is included in the REPORT print-
out. This command is only applicable in the buffer.
The loop count value can be included in any text by typing three question marks in the text
where the loop count is to be inserted. The loop count replaces “???” wherever they appear.
DESCRIBE_SAMPLE “description”
Accepts a 63-character description of the sample being analyzed. This description is saved
with the spectrum using the SAVE command function, and is included in the REPORT
printout.
The loop count value can be included in any text by typing three question marks in the text
where the loop count is to be inserted. The loop count replaces “???” wherever it appears.
ENABLE_AUTOCLR
Enables the AutoClr function of the Easy-MCS for sum-then-replace mode (see
Section 6.2.5). When enabled (i.e., in sum-then-replace mode), the first pass replaces the
data in memory, then additional passes are summed with the data in memory, as in sum
mode.
ENABLE_DISCRIMINATOR
Enables the Discriminator Input on the MCS and disables the SCA Input. This command
performs the same function as clicking “Use Disc” in the Input Control dialog box. This
command fails if the buffer is selected.
ENABLE_SCA
Enables the SCA Input on the MCS and disables the Discriminator Input. This command
performs the same function as clicking “Use SCA” in the Input Control dialog box. This
command fails if the buffer is selected.
EXPORT “[D:\Path\]File[.Asc]”
Exports the viewed spectrum to an ASCII text file. It is valid both for the MCS and buffer.
Any valid filename, including the drive and subdirectory, can be used. If the drive and sub-
directory are omitted, the last subdirectory used for exporting data is used as the default. If a
file extension is not provided, the default extension .Asc is appended to File. This command
is identical to the Export ASCII... command on the File menu.