ORTEC Easy-MCS, Hardware User Manual

Page: 118 / 132

Easy-MCS
™
Multichannel Scaler and MCS-32 (A73-B32) Software 931054C / 1213
108
CLEAR
The channels of spectral data are set to zero. The pass count is also set to zero. This command
is equivalent to the combination of CLEAR_COUNTER and CLEAR_DATA commands.
CLEAR_ALL
This command is equivalent to the combination of CLEAR_COUNTER, CLEAR_DATA, and
CLEAR_PRESETS commands.
CLEAR_COUNTERS
The pass count counter, and the start time and date are set to zero.
CLEAR_DATA
The channels of spectral data are set to zero.
CLEAR_PRESET
The pass count preset is set to zero (disabled).
DISABLE_ACLEAR
Disables the AutoClr function of the Easy-MCS. When disabled, the acquisition mode is set to
Sum mode. See also ENABLE_ACLEAR, SHOW_ACLEAR, and ENABLE_SUMMATION.
DISABLE_DISCRIMINATOR
Disables Discriminator input and enables the SCA input. See also ENABLE_DISCRIMI-
NATOR and SHOW_DISCRIMINATOR.
DISABLE_DWELL_EXTERNAL
Disables External Channel Advance signal and enables the internal dwell-time clock. Dwell
time is set to the value it held before the ENAB_DWELL_EXT command was issued. See also
ENABLE_ DWELL_EXTERNAL and SHOW_DWELL_EXTERNAL. This command is
invalid when acquisition is in progress.
DISABLE_SUMMATION
Places the MCS in replace mode. In replace mode new data replaces the old data when a scan
is made. In sum mode, new data is added to the old data when a new scan is made. See also
SHOW_ SUMMATION and ENABLE_SUMMATION.
DISABLE_TRIGGER
Disables External Start signal and enables internal starting of passes. See also ENABLE_
TRIGGER and SHOW_TRIGGER. This command is invalid when acquisition is in progress.