Orolia Spectracom VelaSync 1232, User Manual

Page: 61 / 268

3.
The Network Access Rules window displays:
4.
In the Allow From field, enter a valid IP address. It is not possible, however, to add
direct IP addresses, but instead they must be input as blocks, i.e. you need to add
/32
at the end of an IP address to ensure that only that address is allowed.
Example:
10.2.100.29/32
will allow only
10.2.100.29
access.
I P a d d r e s s n o m e n c l a t u r e :
IPv4—
10.10.0.0/16
, where
10.10.0.0
is the IP address and
16
is the subnet
mask in prefix form. See the table
"Subnet Mask Values" on page 35
for a list of
subnet mask values.
IPv6— 2001:db8::/48 , representing 2001:db8:0:0:0:0:0:0 to 2001:d-
b8:0:ffff:ffff:ffff:ffff:ffff.
5.
Click the Add button in the Action column to add the new rule.
6. The established rule appears in the Network Access Rules window.
Click the Delete button next to an existing rule, if you want to delete it.
2.9 Configuring Network Settings
CHAPTER
2
•
VelaSync 1232 User Manual Rev. 4 49