Orolia Spectracom VelaSync 1232, User Manual

Page: 179 / 268

Note: Whether or not notifications are enabled/disabled for a given event,
the occurrence of the event is always logged.
All available VelaSync events that can generate a notification to be sent are located under
different tabs in the Notification Events panel:
Timing , GPS , and System .
The VelaSync Events that can automatically trigger a notification are listed in the Event
column. It is possible to:
Mask the alarm generation for specific events (prevent the alarm)
Enable “SNMP” (to send out an SNMP trap)
Send an email to the address specified in the corresponding “Email Address”
column.
4.4.1 Configuring Notifications
To configure Notifications:
1.
Navigate to MANAGEMENT > OTHER: Notifications . The Notifications screen
will display:
It is divided into two panels:
The Actions panel, featuring:
The SNMP Setup button: See "SNMP" on page 57 .
The Email Setup button: Configure VelaSync's interface settings for
Exchange email servers and Gmail.
For more information on this subject, see the Spectracom Technical
Note
Email Notification Setup .
4.4 Notifications
CHAPTER
4
•
VelaSync 1232 User Manual Rev. 4 167