Orolia Spectracom VelaSync 1232, User Manual

Page: 159 / 268

Trimble RES-SMT GG receivers only:
RINEX File Every : [default = 10 s]
Generate YUMA once a day :
If checked [default], enter the desired-time-of-day in the field YUMA
File At [default = 12:00].
If unchecked, determine how often a YUMA file is generated under
YUMA File Every [default=10 s; range = 10 s to 86400 s (1/day)].
Station Name : Enter an alphanumeric 4-letter station name for the server
[default:
spec
]. The names of the files generated will include the station
name.
Record Duration : Determine the duration for how long to keep the gen-
erated data before it gets overwritten [default: 7 days; range = between 2
and 400 days]
3.
Click Submit to start logging ephemeris and almanac data.
4.
Once you submitted the changes, verify that the setup was successful by clicking on
Status , and confirming that the indicator lamp for Server A-GPS Status is
green/ENABLED. The Server A-GPS Data indicator will be green if the RINEX
server is running and the GPS receiver is valid in time and PPS.
Downloading RINEX/YUMA data
Any device that can use RINEX data, can be directed to the locations where they are
stored. For example, Spectracom's GSG-series GNSS simulators allow for a server location
to be set. With other equipment, you can also download the data to your computer, and
then move the files to where they are needed.
To download the data to a client computer, point your computer's web browser to the fol-
lowing address:
For hourly ephemeris data:
http://[IP address of your unit]/files/pub/gps/data/hourly/[YYYY]/[ZZZ]/hour[ZZZ]0.15n.Z
For daily ephemeris data:
http://[IP address of your unit]/files/pub/gps/data/daily/[YYYY]/[ZZZ]/15n/spec[ZZZ]0.15n.Z
3.3 Managing References
CHAPTER
3
•
VelaSync 1232 User Manual Rev. 4 147