OVERVIEW
12
VCB-X Controller Field Technical Guide
Revised 1/23/13
Parts and Descriptions
PART NO.
PART DESCRIPTION
ILLUSTRATION
PAGE NO.
OE364-22
MiniLink Polling Device
Control enclosure is for indoor use only. Used with all Orion controllers
to provide network communications, zone voting, alarming, and tenant
logging capabilities. A MiniLink Polling Device is required on each loop
of a Networked system. Includes: MiniLink Polling Device mounted in
the EE000075-01 control enclosure. Control Enclosure cover is shown
removed in picture.
OE508
Prism 2 Front-End Computer Software
Prism 2 provides standard, easy to understand status screens for each
type of VCB-X equipment installed. Prism software has provisions for cus-
tom screens which allow
fl
oor plans, equipment photos, or user-de
fi
ned
summary screens to be implemented to meet their own individual needs.
All controlling setpoints, trend logs, and alarm conditions are accessed in
the Prism environment. Prism can be con
fi
gured for direct on-site installa-
tion, remote modem connection, or TCP/IP Internet connection to several
installations.
OE365-
15-EBA-A
E-BUS Adapter Board
The E-BUS Adapter Board is used for connecting the EBTRON
®
or
GreenTrol
TM
Air
fl
ow Measurement Digital Transmitter to the VCB-X Control
System. The E-BUS Adapter Board connects to the VCB-X Controller with
an EBC E-BUS cable. Cable supplied separately.
Pages 28,
29 & 51
MS000248
E-BUS Adapter Hub
The E-BUS Adapter Hub is used for connecting E-BUS devices and
Controllers together with EBC E-BUS cables of varying lengths. Includes:
E-BUS Adapter Hub.
Pages
28 & 29
HZ-EBC-248
E-BUS Adapter Hub with 1.5 Foot EBC E-BUS Cable
The E-BUS Adapter Hub is used for connecting E-BUS devices and
Controllers together with EBC E-BUS cables of varying lengths. Includes:
E-BUS Adapter Hub and 1.5 foot EBC E-BUS cable.
Pages
28 & 29
OE437-03
Communication Surge Protector Kit
Used to isolate power surges to the communications wiring caused by
lightning strikes for communications wiring loops that are routed outdoors
or between buildings. One kit is required at each point where the commu-
nications wiring leaves or enters a building.
Includes: Communication Bus Surge Protector, Base Module, and Mount-
ing/Wiring Instructions.
N/A
OE310-21-LP
Lighting Controller
Adds lighting control capability to the VCB-X Control System. Lighting
Controller provides up to (7) independent time schedules. Provisions for
photocell or light sensor light level control are also provided. Lighting
Controller only provides Pilot Duty Relay Outputs. An external Lighting
Contactor must be provided by others. If a Light Sensor OE259 is to be
used with the Lighting Controller, it must also be ordered from WattMaster.
Includes: Lighting Controller with Backplate.
N/A
OE259
Light Sensor
Ambient Light Sensor
(Use with Lighting Controller for light sensing.)
24VDC power, 1m Ohm to 1.5k Ohm output signal. Supplied with weather-
proof handy box for outdoor or indoor mounting. Light Sensor threads into
conduit
fi
tting. Includes: Light Sensor and weatherproof handy box.
N/A
EPRO
M
U3
U5
RAM
CX2
1
U2
R1
C3
U4
CX3
CX4
YS
101818
P552
PROC
ESSO
RPBO
AR
D
CX5
C1
U1
R2
CX1
CX6
WDO
G
U6
PHIL
IP
S
D1
P1
X1
C2
C4
0-10V
4-20mA
THERM
R27
R3
1
D4
GND
24
V
A
C
TB1
D5
C11
U12
LED 2
POWER
V1
R2
5
R2
6
C7
CX
15
CX
13
PROC.
DRIVER
LOOP
DRIVER
LOCAL LOOP
GN
D
AIN 2
AIN 1
+5V
TB
2
P4
OFF=0-5V
AIN2
AIN1
0-10V
4-20mA
THERM
SH
LD
T
TB
3
R
U1
5
LD5
LD6
U1
3
C8
LED 1
RV1
R4
VREF
CX
2
U11
YS101900PMINILINK
POLLING
DEVICE
REV. 1
OFF
1
2
4
8
16
32
CX
14
NETWORK
DRIVER
RN3
SHLD
T
TB4
R
U1
4
NETWORK
LOOP
P5
ADD
P3
R24
LD4
C9
U10
RN2
SW1
R30
X2
R29
R28
C10
U6
CX6
CX
1
U7
U1
X1
C3
C1
R3
CX7
