44
Chapter 9: Safety
Read Before Welding
ONLY PERSONNEL TRAINED AND CERTIFIED BY
THE MANUFACTURER SHOULD SERVICE THE UNIT.
Use only genuine replacement parts from the manufacturer .
**Contact Sunstone Engineering before opening the unit for any reason**
SAFETY PRECAUTIONS
The below safety advice is generalized advice for the welding industry . These safety precautions are not
all inclusive . All users should exercise caution while using this device . The following groups of symbols are
warning symbols:
SAFETY PRECAUTIONS FOR FIRE OR EXPLOSION
There is a possibility that flying sparks, hot work pieces, and/or hot equipment can cause fires and burns .
Ensure that the work area is clean and safe for welding before starting any weld job .
•
Wear appropriate eye protection while using the weld head .
•
Do not install or operate unit near combustible surfaces .
•
Do not install or operate unit near flammables .
•
Do not weld where flying sparks can strike flammable material .
•
Remove all flammable materials from the welding area . If this is not possible,
tightly cover them with approved covers .
•
Protect yourself and others from flying sparks and hot metal .
•
Do not weld where the atmosphere may contain flammable dust, gas, or vapors .
•
Remove any combustibles, such as butane lighters or matches, from your person before doing any
welding .
•
Watch for fire and keep a fire extinguisher nearby .
•
Do not overload your building’s electrical wiring – be sure the power distribution system is properly
sized, rated, and protected to handle this unit .
