28
Step 12:
Click on “Robot” in the menu bar again . Drop down and then click
on “Receive C&T Data .”
Step 13:
A popup windown will appear . Click the “Receive” button to
initiate communication between your PC and the Janome .
Step 14:
Once the PC and Janome finish communicating, another popup window will appear . Click the “OK” button .
If this step is not completed successfully, contact your IT department to help you setup the IP Address .
Step 15:
Next we will create a weld program . Click on “Robot” in the
menu bar . Next drop down and click “Meca Initialize .” This will
initialize the robot and move the X,Y, and Z parameters to the
‘Home’ position . CAUTION: This will move the robot to the home
position, so don’t be in the way of the robot arm .
