27
Step 8:
Setup your fixture to the table . M4 screws can be used to mount directly to plate .
Step 9:
Install the JR-C-Points (Sunstone) software . Next, open the software .
Click on “Robot” in the menu bar, and then drop down and click on “Ethernet
Settings .”
Step 10:
Click the “Register” button, then type in the IP address of the
Janome . The Robot Name can be changed .
Step 11:
Next, select the robot by clicking on it, and then click “Set Target .” Then close the
window by clicking “Close .”
