16
GENERAL SETTINGS
Chapter 5: Welding with Pendant
Step 1:
Connect the hand-held control unit/ pendant to the TPU port on the
front of the CNC table .
Step 2:
1 . Plug in the power cord on the back of the CNC table .
2 . Power on the CNC table using the power switch on the back of the
CNC table .
3 . If not already on, turn on the Orion 250i2 and the weld head .
GENERAL SETTINGS
Application
Tip Shape Waveform
Ignition
Agitation
Length
Power
Copper (0 .015 - 0 .020)
Flat
Triangle
St
None
40 ms
11 kW
IGNITION SETTINGS
Tip Lift Off Delay
60 µs
Retraction Distance
1.0mm
